Win7安装错误解决方法

[ 字号: ] [ 关闭 ] 2010-02-24 15:52:32 原创 作者:www.pcpcy.cn 浏览次数: 发表评论

关键词:windows 7安装出错_怎样装windows 7

Windows7安装时有许多提示错误,不知道怎么解决,看看这里,或许有些帮助。本文出现的问题同样应用于其他版本的Windows 7,甚至是Vista,收藏一下本文,哪一天能用上。

序号:1

原文:Please wait…

翻译:请稍候…

解决办法:这是安装开始时安装程序加载时的提示语。如果卡在这个地方,请检查硬件是否正常,如果正常请检查MD5是否一致。如果配置低,可能要多等一下,请耐心等待。在PE2.0以下在这一步会提示无法安装,原因是PE版本太低。请使用高于或等于2.0版的PE,论坛有提供

序号:2

原文:Setup is copying temporary files…

翻译:程序正在复制临时文件…

解决办法:同1

序号:3

原文:Setup is starting…

翻译:安装正在启动

解决办法:同1

序号:4

原文:Windows installation cannot be started from the current operating system. To install Windows, boot from the installation media, or upgrade to Windows XP or later and restart the installation.

翻译:无法从当前操作系统启动Windows安装。若要安装Windows,请从安装介质启动,或升级到Windows XP或更高版本,然后重新启动安装。

解决办法:已经说得很清楚了,如果你是从2000系统安装,那是不行的。请在XP或者2003、Vista升级或安装。

序号:5

原文:Install Windows

翻译:安装Windows

解决办法:同1

序号:6

原文:Windows could not load required file. The file may be corrupt. To install Windows, restart the installation. Error code: 0x%2!X!

翻译:Windows无法加载所需的文件。该文件可能已损坏。若要安装 Windows,请重新启动安装。错误代码: 0x%2!X!

解决办法:典型的ISO文件损坏情况,请检查ISO的MD5是否一致,ISO损坏的原因很可能是下载时造成的。请使用其他下载工具下载。比如我上次用迅雷下载后发现MD5不一样。只得重新下载,第二次下载后一致了。如果是刻碟安装,很可能是光盘损坏或有些文件刻录时错误。请重新刻录。

序号:7

原文:You must be an administrator to install Windows.

翻译:您必须是管理员才能安装Windows。

解决办法:出现这种情况很可能是从Vista升级,权限不够。所以请关闭系统保护后重新安装。或者在PE中的权限不够,请用administrator用户登陆系统。

序号:8

原文:Windows Setup does not support this usage of the /BTFolderPath command-line argument. To install Windows, restart the installation without this argument.

翻译:Windows 安装程序不支持 /BTFolderPath 命令行参数的此种用法。若要安装 Windows,请在不使用该参数的情况下重新启动安装。

解决办法:出现这种情况是手动修改setup.exe参数造成,如果你没有修改过就不会出现。如果在语句后有此语法,请手动删除。

序号:9

原文:Windows cannot display Setup in the language. Error code: 0x%2!X!

翻译:Windows 无法显示***X语言的安装程序。错误代码: 0******

解决办法:很可能是语言文件损坏或安装程序中没有相应语言。请检查ISO的MD5是否正确,刻录没有错误。检查ISO目录下的文件是否删除过。建议不要使用vLite进行精简。

序号:10

原文:Windows could not determine the language to use for Setup. Error code: 0x%1!X!

翻译:Windows 无法确定用于安装程序的语言。错误代码: 0******

解决办法:同9,可手动修改语言,在Vlite中设置默认安装语言即可。一般不会出现这种情况。

序号:11

原文:This version of Windows is for a 32-bit machine and cannot run on the current 64-bit operating system.

翻译:此版本的Windows用于32位计算机,无法在当前的64位操作系统上运行。

解决办法:我用的是32位Windows ,如果你用64位安装程序在32位操作系统上安装就会提示:“此版本的Windows用于64位计算机,无法在当前的32位操作系统上运行。”或“不是有效的64位程序”。如果不懂的话请百度一下搜索32位与64位的关系吧

序号:12

原文:Windows could not create temporary folder [%1!s!]. Make sure you have permission to create this folder, and restart the installation. Error code: 0x%2!X!

翻译:Windows 无法创建临时文件夹。请确保您具有创建该文件夹的权限,并重新启动安装。错误代码: 0******

解决办法:请在其他磁盘留出至少2G的空间,因为Windows会把临时文件先放在剩余空间最多的磁盘.留好之后重新打开安装程序即可正常安装!这就是之所以为什么会出现这个错误的原因。

序号:13

原文:Windows could not update the installation files. To install Windows, close Setup and restart the installation. Error code: 0x%1!X!

翻译:Windows 无法更新安装文件。若要安装 Windows,请关闭安装程序并重新启动安装。错误代码:0******

解决办法:原因有几点,如果光盘安装请不要选择联网进行更新,光盘是只读的。建议不要选择联网下载更新文件,直接选跳过最好.没联网的话无法下载就会提示这个错误.

序号:14

原文:Windows could not start Setup from the local system. To install Windows, close Setup and restart the installation.Error code: 0x%2!X!

翻译:Windows 无法从本地系统启动安装程序。若要安装 Windows,请关闭安装程序并重新启动安装。

解决办法:因为当前操作系统低于XP,请使用XP或更好的操作系统进行安装,使用PE2.0以上进行安装.不要用DOS安装.

序号:15

原文:Windows was unable to copy installation files due to an internal error. To install Windows, restart the installation.

翻译:由于内部错误,Windows 无法复制安装文件。若要安装 Windows,请重新启动安装。

解决办法:同6。请检查ISO的MD5是否正确

序号:16

原文:Windows Setup experienced an unexpected error. To install Windows, restart the installation. Error code: 0x%1!X!

翻译:Windows 安装程序出现错误。若要安装 Windows,请重新启动安装。错误代码: 0******

解决办法:请重试几次。如果还是不行同6。

序号:17

原文:Install Windows

翻译:安装Windows

解决办法:同1

序号:18

原文:Windows was unable to create a required installation folder. Error code: 0x%1!X!

翻译:Windows 无法创建所需的安装文件夹。错误代码::0******

解决办法:同6或同12

序号:19

原文:Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least 5216! megabytes (MB) of free space.Error code: 0x%1!X!

翻译:系统分区X:上的可用空间不足。Windows 安装至少需要该分区上5216兆字节(MB)的空间。若要安装 Windows,请释放足够的空间,并重新启动安装。错误代码:0******

解决办法:安装盘上必须至少有5.1G的空间.比如安装到C盘,C盘必须还剩下5.1G的硬盘空间,如果不够.请删除一些东西.或重新分区.

序号:20

原文:Windows was unable to create required installation folder. An existing file or folder of this name could not be deleted.Error code: 0x%1!X!

翻译:Windows 无法创建所需的安装文件夹。无法删除具有该名称的现有文件或文件夹。错误代码:0******

解决办法:创建文件名重复,并且原文件无法覆盖造成的错误。请最好在空磁盘上安装。或删除原来重复的文件。比如XP与7不能同盘(指一般安装)

序号:21

原文:Windows was unable to locate required installation file. Verify that the installation source is valid, and restart the installation.

翻译:Windows 无法找到所需的安装文件。请验证安装源是否有效,并重新启动安装。

解决办法:原文件被删除或破坏或丢失。请重新下载ISO文件。同6

序号:22

原文:Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.

翻译:Windows 安装出现错误。请验证安装源是否可访问,并重新启动安装。

解决办法:同6

序号:23

原文:Windows cannot access the installation sources. Verify that the installation sources are accessible, and restart the installation.

翻译:Windows 无法访问安装源。请验证安装源是否可访问,并重新启动安装。

解决办法:同6

序号:24

原文:Windows Setup cannot find a location to store temporary installation files. Make sure BitLocker Drive Encryption is suspended (also referred to as disabled).

翻译:Windows不能找到临时安装文件,请重新启动安装

解决办法:请确认在安装过程你没有删除任何安装文件,比如安装到一半,你进入PE删除了某些文件。遇到此问题请重新安装Windows。

这些都是典型的安装故障。知道这些,对安装windows 7有很大帮助。

 

 
 



上一页:春天怎样保养你的电脑
下一页:Win XP无法访问Win 7文件

评论

发表评论
[ 字号大小: ] [ 加入收藏 ] [ 打印 ] [ 关闭 ]

更多